Make the Low Cost car tool - with carprog full v4.1 basic you will receive many extra functions (like car radio code calculator CC1, EEPROM programmer and VAG dashboard's programmer by CAN) and all additional software's you can buy extra according your need.
Powering up the device. CarProg can be used with external power supply (+7 - +12V stabilized), only with USB connection or with diagnostic cable ( for ex. OBDII)
- Standard power socket (positive in the middle) voltage in range +7…14V stabilized can be used in any cases. Use it when +12V voltage is required
(Transponder read/write, some MCU`s read/write)
- USB power from PC - 5V, 100mA. Always must be connected because USB cable is used for Device – PC communication. Is enough for small power consumption
operations (i.e. EEPROM read/write)
- Using standard Car diagnostic Cable
Installing software. Copy software from CD or from your support page on www.codecard.lt to any directory on your PC. Main CarProg full v4.1 file can be older version, just click on Update-Internet and CarProg will by updated automatically.
After update CarProg software must restart automatically and CarProg hardware update must be done. Don’t disconnect CarProg USB cable while update process. If updates fail, try again.
No comments:
Post a Comment